Cash For Cars Melbourne – 8 DIY Car Maintenance Tips You Can Handle- Checklist

DIY car maintenance tips8 DIY Car Maintenance Tips You Can Handle- Checklist

Quality maintenance care on your car is necessary to keep it on the run. Well, you don’t have to ask help from professionals for maintaining your car because you can do it your own. Definitely, you can save a large amount of money by doing basic and simple repairs by yourself. Whether you’re mechanically inclined or not, you can make the most of your effort in this endeavor.
If you prefer to do car maintenance works yourself, the following DIY tips can help you on the process. Powered by Total Car Collections Melbourne’s leading cash for cars buyers.

Windshield Wipers

Your car’s windshield pipers can last more than 6 months or even a year depending on how you take care of it. In maintaining the wipers, you don’t have to go to an auto shop for help because it’s a simple thing to do. Just follow your owner’s manual about detaching the metal from the care. Pay attention to the blades. Make sure to remove them and replace with a new one.

Oil and oil filter

You need a funnel, oil pan, oil filter wrench and ratchet for this one. Most experts say that you should change oil every 300 miles. Yet, once you use the quality product and oil, you can manage to change the oil every 500 miles. Drain the oil once the engine is cold using the oil filter wrench. Fill your tank with the new oil filter about 2/3 using funnel. Make sure to double check the level of the oil to avoid leak.

Air Filter

Usually, replacing your air filter is good after a year of use. Your car’s air filter is actually a black rectangular box. Check if your new air filter fit to it.

Battery Maintenance

For about 20 minutes, you can finish this task with a corrosion-removal fluid. Have your battery properly connected and see if there are crunchy white on the posts. Using a flathead screwdriver, you can remove the negative cable. Apply fluid to the battery then clean after with a wire brush. Then, dry the posts.

Spark Plugs

Spark plugs are those that are connected to thick rubbery wires. There are about 8 plugs that you can find. Then remove the attached wires one at a time. Remember that they are installed in a particular order so be careful with removing them. Using the socket, remove the spark plug then install the new one after.

Brake Pads

Check your manual about your brake pads. Remove the wheels first to get through the tires. For the brake pads to be on top, remove your car’s brake caliper first. Bolts are to be removed as well. Then, replace the old pads with the new brake pads.

Radiator Flush

This is your car’s cooling system that needs to be cleaned efficiently. See to it that it is completely cold before cleaning. You have to replace the old drain plug with the radiator cup set aside. Add the cleaning solution to the flush then fill with water. Then, start the car to see if it worked.

Replacing Fuel Filter

See if the fuel system pressure is working well. Then disconnect all fuel lines that are connected to the fuel filter. See if there are open-end wrenches. Make sure that the wrench fit to the actual filter for best results.

Now, you can maintain your car on your own with these tips. Just follow each instruction and you’ll manage to make the most of your goal. Most of the filters and parts you can find easily from Repco or other car parts store, but we strongly recommend genuine car parts instead of the after market one.

Online Enquiry Form

Please Fill the below form and get free quote for your car

Online Enquiry Form

Please Fill the below form and get free quote for your car